产品中心/ products

您的位置:首页  -  产品中心  -  日本SMC电磁阀  -  SMC电磁阀  -  VS26S517DF213A销售日本SMC流量减压阀

销售日本SMC流量减压阀

  • 产品型号:VS26S517DF213A
  • 更新时间:2023-11-25

简要描述:销售日本SMC流量减压阀,SMC减压阀技术
Precision pressure reducing valve, export pressure to not exceed 90% of the import pressure.
is in the control of the gas control valve directly connected to a two thre

产品详情

    销售日本SMC流量减压阀,SMC减压阀技术
    减压阀的内部受压部分通常都是用膜片式结构,
    2) Connect the piping to purge thoroughly.
    3) The flow direction of the air is installed in the direction of the arrow and can not be installed.
    4) the use of plastic materials, pressure relief valve, should avoid direct sunlight.
    此时,A口压力为设定压力。
    当A通口压力上升,高于P1通口的压力,
    则F2>F1,调压活塞上移,
    上截止阀芯开启,A口与R口接通并排气。当
    A口压力下降F2=F1时,又恢复原状态。
    大流量精密减压阀有气控型和手动操作型以及外部导电磁型。
    ,其工作寿命比膜片式减压阀长。
    故阀的开口量小,输出流量受限制。
    VEX1系列减压阀的受压部分是用平衡座阀式阀芯,
    可以得到很大的输出流量和溢流流量,故称为大流量精密减压阀。
    The output pressure must not exceed the maximum value of the set pressure.
    销售日本SMC流量减压阀,SMC减压阀技术
    导压力P1作用在调压活塞上的力为F1,
    A通口气压力经反馈通道作用在调压活塞下的力为F2.
    当F1=F2时,一对截止阀芯处于封闭状态。
    因两阀芯是对称结构,弹簧力使阀芯复位。
    Port A and Port P are connected and supplied with gas. When the A port pressure rises to F2 = F1, it returns to its original state.
    External pilot electromagnetic large flow precision pressure reducing valve
    当A通口压力下降,高于P1通口的压力,则F2<F1,
    调压活塞下移,下截止阀芯开启,
    A口与P口接通并供气。当A口压力上升F2=F1时,又恢复原状态。
    外部导电磁型大流量精密减压阀是在气控型减压阀的控制口直接连接一个二位三通电磁阀。
    SMC VEX1系列大流量精密减压阀使用注意
    1)普通型减压阀,出口压力不要超过进口压力的85%;
    大流量精密减压阀的排气口上可以装消音器
    精密减压阀,出口要压力不要超过进口压力的90%。
    输出压力不得超过设定压力的zui大值。
    2)连接配管要充分吹洗。
    3)空气的流动方向按箭头方向安装,不得装反。
    4)使用塑料材质的减压阀,应避免阳光直射.
    ,SMC减压阀技术

在线咨询

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7
公司简介  >  在线留言  >  联系我们  >  
产品中心
日本SMC电磁阀
版权所有©2024 上海乾拓贸易有限公司 All Rights Reserved   备案号:沪ICP备09006758号-24   sitemap.xml

沪公网安备 31011402005376号